X15
The X15 is the fixed slim module of the X series — the thinnest fixed-window engine for narrow fascia slots, test-station lips and rail pockets, hanging the full 2D set in a slot others can't hold.
Key specifications
| Function | Slim fixed 2D capture for narrow fascia and rail-pocket slots |
|---|---|
| Imaging engine | CMOS imager, 0.5–0.75 MP class (family standard) |
| Symbologies | All 1D plus QR, DataMatrix, PDF417, Aztec, China Post codes |
| Precision | 4 mil minimum element width class |
| Read range | 0–80 cm class (family-class value) |
| Mounting | Slim-form fixed mount — narrow geometry per datasheet |
| Host interfaces | USB HID / CDC, RS232 |
| Target applications | Test-station lips, rail pockets, slim-fascia fixtures |
Full specification
| Parameter | Value | Note |
|---|---|---|
| Product family | EMS Biometric X-series fixed module | Slim tier |
| Imaging sensor | CMOS, 0.5–0.75 MP class | Family standard |
| Resolution | 4 mil class | Per-model in datasheet |
| Symbologies | EAN/UPC, Code 39/93/128, GS1-128, ITF-14, Codabar, QR, DataMatrix, PDF417, Aztec, China Post codes | Full 2D set |
| Read range | 0–80 cm class | Family-class; per-model curve in datasheet |
| Host interfaces | USB + RS232 | Both standard |
| Mounting | Slim-form fixed mount | Slot cutout drawing in datasheet and SDK pack |
| Operating temperature | Commercial-to-industrial class | Mounting-dependent; confirm per model |
| Supply terms | MOQ 1 pc · sample 1–3 days · production 10–25 days (under 5,000 pcs) | EMS standard terms |
| Warranty | 2 years | From first unit |
Family-class values shown — exact per-model figures in the datasheet; the FAE team checks slim-slot fit within 48h.
The lip of the fixture is the thinnest real estate on the line.
Test-station lips, fixture pockets and interlock slots are the hardest spots on a line — too narrow for a standard module, too important to skip. Production traceability wants a read exactly there, between the part dock and the test card. The X15 puts the full 2D set into that slim slot:
- The slot gets a reader, not an excuse — the slim form is engineered for the narrow faces of test fixtures, where every other module flunks the cutout test.
- Reads at the point of record — the fixture's own serial and the part's DataMatrix decode at the lip, closing the record at the station where the test actually passes.
- Line-engineering clean — the cutout drawing in the SDK pack lets your fixture team design-in the slot from the start; MOQ 1 pc keeps two pilot fixtures affordable before the line-wide change.
X15 FAQs
Dimensions are in the datasheet, and the cutout drawing ships free with the SDK sample — measure once against your lip, and the fixture engineer's drawing is done.
The engine family stays the 4 mil class with the 0–80 cm family range; the slim change is a housing change, and the per-model curve in the datasheet is the number that answers this.
The full 2D set is already on board — the upgrade path is firmware, not hardware; the FAE team schedules the update flatly through the SDK routine.
Let an engineer fit your X15 slot.
Send your cutout drawings and fixture flow — get a fit plan, updated datasheet and sample offer within 48h.
