Barcode · Handheld 1D CCD
Red light for the pick face

U1C

The U1C is the U-series 1D CCD scanner — the low-cost red-light CCD entry that reads pick lists, rack labels and container IDs at the 4 mil class, with MOQ 1 pc supply and a free SDK in the box.

Red-line CCD 4 mil class USB + RS232
Verified · unit-level test pass
U1C 1D CCD barcode scanner product photo

Key specifications

U1C · datasheet extractRev 1.0
FunctionCCD entry scanning for rack, shelf and container labels
Scan engine1,500-pixel linear CCD, red illumination (family standard)
SymbologiesEAN/UPC, Code 39/93/128, GS1-128, ITF-14, Codabar, China Post codes
Precision4 mil minimum element width class
Read range0–80 cm class (family-class value)
Host interfacesUSB HID / CDC, RS232
Field ergonomicsRed line marks the pick face clearly under warehouse lighting
Target applicationsHand-pick bays, cycle-count stations, inbound receipt desks

Full specification

ParameterValueNote
Product familyEMS Biometric U-series handheld CCDEntry CCD tier
Capture sensor1,500-pixel CCD lineFamily-standard; exact pitch in datasheet
Resolution4 mil classPer-model in datasheet
SymbologiesEAN/UPC, Code 39/93/128, GS1-128, ITF-14, Codabar, China Post codesDense 1D set
Read range0–80 cm classFamily-class; per-model curve on request
Host interfacesUSB + RS232Both standard
Light sourceRed LED (CCD)No laser classing
Operating temperatureIndoor commercial classSee W-series for industrial range
Supply termsMOQ 1 pc · sample 1–3 days · production 10–25 days (under 5,000 pcs)EMS standard terms
Warranty2 yearsFrom first unit

Family-class values shown — exact per-model figures in the datasheet; the FAE team confirms pick-face coverage within 48h.

Warehouse picker scanning rack labels with U1C CCD scanner
Application · Warehouse picking

The pick face, at hand's reach.

Cycling count in a small warehouse is usually done with fingers and a clipboard — and inventory error rates commonly run 1–3% in setups without machine capture, which quietly eats 1–5% of margin. The U1C is the lowest-cost way to close that door: a red-line CCD gun that reads the rack label you already printed:

  • One hand, no battery roster — wired CCD draws from the checkpoint PC, so a picker grabbing the U1C at shift start never learns what "dead scanner" means.
  • Labels survive cheap printers — the 1,500-pixel red line takes the thermal labels, shelf stickers and reused tote tags that low-margin DCs run on.
  • Cycle-count discipline — with RS232 output the count goes into the WMS directly, which trims double-entry and the 10% phantom-payroll margin of error that manual counts invite.

U1C FAQs

The red LED assist marks the scan position clearly under normal warehouse lighting; for heavy shadow or dark totes the laser U1 gives a longer reach — a one-sample test on your rack depth settles it.

Yes — USB HID acts as a keyboard; RS232 mode gives a serial stream with the free SDK routine, which WMS integrators usually have dialed in within hours.

CCD reads worn thermal labels better than a laser in most degrading-label cases, but torn or double-stacked labels always need a reprint — that is physics, not the device.

Let an engineer verify your U1C pick zones.

Send your label stock and aisle lighting notes — get a coverage check, updated datasheet and sample offer within 48h.

Get FAE support →